What is my IP
The IP address sites see, its location and network, plus four checks: a WebRTC leak, the OS of your connection by TCP/IP (p0f), the time zone and automation flags. Everything runs as soon as the page opens.
Your IP address
Comparing what the network sees with what the browser reports…
| Check | Network sees | Browser reports | |
|---|---|---|---|
| IP address | … | … | |
| OS | … | … | |
| Time zone | … | … | |
- Network
- …
- Host
- …
- Proxy headers
- …
- Automation
- …
- Browser languages
- …
- Device time
- …
WebRTC ICE candidates
Also
What the IP checker shows
The page shows the IP address that sites see when you open them in this browser: its country, region, city, time zone, network (ASN) and host name. At the same time four checks run: whether WebRTC reveals an address from another network, which OS your connection looks like by TCP/IP and whether it matches the browser OS, whether the browser time zone matches the location of the IP and whether the browser reports automation.
Switch on a proxy or VPN and press Check again to see what changes. The page checks your own connection, the one this browser uses right now.
How to use it
-
Open the page
The IP address and network appear right away. The browser checks finish within a few seconds.
01 -
Switch on the proxy or VPN
Set up the proxy in the browser, the antidetect profile or the system, then press Check again.
02 -
Read the statuses
Each block shows "No problems found", "Problem found", "Not checked" or "Check failed". Details for a problem are right under its status.
03
What each value means
- IP address
- The address our server sees for your request. If the connection goes through a proxy or VPN, this is its exit address.
- Location and IP time zone
- Taken from the GeoLite2 database. The location is approximate: for mobile and some corporate networks the city can be far off or missing.
- Network
- The autonomous system (ASN) the address belongs to and its organization: a home provider, a mobile carrier, a hosting company.
- Host
- The reverse DNS name of the address. It is shown only if that name resolves back to the same IP.
- Transparent proxy headers
- Via and Forwarded headers in your request. Some proxies add them and tell the site that a proxy is in use.
- WebRTC
- Public addresses the browser revealed through WebRTC. An address from the same network, for example IPv4 and IPv6 of one provider, is not a leak. Hidden local addresses (.local) are not counted.
- Network OS (p0f)
- The OS your connection looks like by its TCP/IP parameters: TTL, window size, option order. Through a proxy this is the OS of the proxy exit. It is an estimate, not an exact detection.
- Time zone
- Compared by the current offset from UTC, not by the zone name: Europe/Kyiv and Europe/Kiev are the same zone.
- Automation
- The navigator.webdriver flag, which browsers controlled by Selenium, Puppeteer, Playwright and similar tools set.
- Overall risk
- An overall estimate from clean to high based on the same signals. If it is unavailable, the page still shows each check on its own.
Typical problems and what to do
WebRTC leak
The browser reveals an address from another network next to the proxy one, usually your real one. Restrict WebRTC in the browser settings or with an extension, or turn on WebRTC substitution in the antidetect profile. Then check again.
Connection OS differs from the browser
By TCP/IP the connection looks like Linux while the browser reports Windows — that is how most datacenter proxies look. You need a proxy whose TCP/IP fingerprint matches the profile OS: ipv.rent static proxies let you switch the exit OS profile for free.
Time zone mismatch
The browser time zone differs from the location of the IP. Set the time zone of the proxy country in the browser profile or choose a proxy in your own time zone.
Automation detected
navigator.webdriver = true is a flag any site can read. Antidetect browsers and automation frameworks have settings that hide it.
Transparent proxy headers
The proxy adds Via or Forwarded to your requests and so announces itself. Use a proxy that does not add these headers.
How the check works
The IP address, location, network and host are determined on our server from your request. Location and network come from the GeoLite2 database, the host from a reverse DNS lookup. The TCP/IP parameters of your connection are measured by a separate measurement server: the browser connects to it directly, because our server works behind a CDN and does not see them.
WebRTC addresses, time zone, languages and the OS are collected in your browser; WebRTC addresses are gathered through a public STUN server. The browser sends these signals to our server, which compares them with what it sees and gets an overall risk estimate.
The results exist only on the open page. They are not saved on our server or in the browser.
Questions about the IP checker
Where do the IP address and location come from?
The IP address is the one your request arrived from. Country, region, city, time zone and network come from the GeoLite2 database by MaxMind. Databases of this kind are approximate: the city can be off, especially for mobile networks.
What is a WebRTC leak?
WebRTC lets the browser discover its own network addresses for calls and video. Through it a site can learn your real IP even when traffic goes through a proxy. The page counts a leak only when the WebRTC address belongs to a different network than the address the site sees.
Why compare the time zone?
Anti-fraud systems compare the browser time zone with the location of the IP. An IP in Germany next to a browser set to UTC+3 is a common sign of a proxy.
How is the network OS (p0f) determined?
The browser connects directly to a measurement server, and the server reads the TCP/IP parameters of the connection: TTL, window size, MSS, option order. Through a proxy these are the parameters of its exit. Our server sits behind a CDN and does not see them itself.
Does "Not checked" mean there is a problem?
No. It means the browser did not provide the data, for example WebRTC is turned off or blocked. Turned-off WebRTC is not a leak.
Is my data saved?
No. The results exist only on the open page and disappear when you close it.
This product includes GeoLite2 data created by MaxMind, available from https://www.maxmind.com.
Ready to connect your first pool of IPs?
Signing up takes 2 minutes, credentials arrive less than a minute after payment.
or email us at [email protected] — reply within 2 hours